Do Implant Coatings Affect Healing of Placed Implants? An Umbrella Review.

PURPOSE: To analyze the available evidence and assess the effect of different implant coatings on healing outcomes. MATERIALS AND METHODS: Using the PICOS strategy, a structured question was formed. A protocol was agreed upon and registered with PROSPERO (no. CRD42022321926). The MEDLINE, Embase, Cochrane Database of Systematic Reviews, Scopus, Web of Science, Pubmed, and ScienceDirect databases were searched using a structured strategy. Study selection was independently carried out in duplicate, first by title and abstract, then by full-text assessment. Quality and risk of bias were independently assessed in duplicate using AMSTAR 2 and ROBIS. Data extraction was independently undertaken in duplicate using a predefined extraction form. RESULTS: The search yielded 11 systematic reviews for inclusion. The most commonly assessed coatings were based on calcium phosphate-including hydroxyapatite (HA), brushite, and bioabsorbable nano-HA-followed by bisphosphonate, then bioactive glass coatings. Included reviews most frequently assessed marginal bone loss (MBL), bone-to-implant contact (BIC), and survival/success rates. There was considerable heterogeneity and small sample sizes. The quality assessment suggested low confidence in the reviews and high risk of bias. CONCLUSIONS: The included reviews provide weak evidence that implant coatings improve osseointegration and reduce MBL following implant placement. There was weak evidence for progressive complications for calcium phosphate coatings. Further research and long-term multicenter controlled clinical trials with improved standardization and control of bias are required to better understand the effects of coating implants.

Comparison of Malondialdehyde Levels among Patients with Sandblasted Acid-Etched and Anodized Surface Dental Implants: A Prospective Clinical Study.

Inflammation that occur as a part of body's response to implant-tissue contact can result in oxidative stress. Therefore, exploring the oxidative stress around different surface treated dental implants is essential to improve the performance of implants. The purpose of this study was to detect and measure the level of malondialdehyde (MDA), oxidative stress marker among patients with sandblasted acid-etched and anodized surface dental implants. In this prospective clinical study, 78 patients who had undergone implant placement for missing single posterior tooth in mandible using sandblasted acid-etched and anodized surface dental implants during August 2019 - December 2019 were enrolled according to strict inclusion and exclusion criteria and were categorized into Group 1: SLA (n = 27), Group 2: SLActive (n = 26), Group 3: TiUnite (n = 25) based on the surface modification of the implants. Peri-implant crevicular fluid (PICF) was collected and MDA was quantified using ELISA kit at 3 months and 1 year. Statistical analysis was performed using one-way ANOVA, followed by Tukey's HSD post hoc. For intragroup comparison, paired t-test was used. MDA levels in group 3 implants was significantly higher than groups 1 and 2 (P ≤ 0.05). On pairwise comparison, there was a statistically significant difference between the groups at baseline (P ≤ 0.05) and 1-year follow-up (P ≤ 0.05). Intragroup comparison showed that there was a statistically significant difference from baseline in all the three groups (P ≤ 0.05). MDA level in peri-implant crevicular fluid was high around TiUnite dental implant as compared to SLA and SLActive implants.

Soft and Hard Tissue Integration around Percutaneous Bone-Anchored Titanium Prostheses: Toward Achieving Holistic Biointegration.

A holistic biointegration of percutaneous bone-anchored metallic prostheses with both hard and soft tissues dictates their longevity in the human body. While titanium (Ti) has nearly solved osseointegration, soft tissue integration of percutaneous metallic prostheses is a perennial problem. Unlike the firm soft tissue sealing in biological percutaneous structures (fingernails and teeth), foreign body response of the skin to titanium (Ti) leads to inflammation, epidermal downgrowth and inferior peri-implant soft tissue sealing. This review discusses various implant surface treatments/texturing and coatings for osseointegration, soft tissue integration, and against bacterial attachment. While surface microroughness by SLA (sandblasting with large grit and acid etched) and porous calcium phosphate (CaP) coatings improve Ti osseointegration, smooth and textured titania nanopores, nanotubes, microgrooves, and biomolecular coatings encourage soft tissue attachment. However, the inferior peri-implant soft tissue sealing compared to natural teeth can lead to peri-implantitis. Toward this end, the application of smart multifunctional bioadhesives with strong adhesion to soft tissues, mechanical resilience, durability, antibacterial, and immunomodulatory properties for soft tissue attachment to metallic prostheses is proposed.

Bone ingrowth into a porous structure is achieved by preceding fibrogenesis and vascularization.

Porous structures are frequently used in surgical implants to strengthen the interlocking power produced by bone ingrowth. Therefore, we aimed to elucidate the mechanism underlying bone ingrowth into a porous structure accompanied by vascularization. A nonbioactive polyetheretherketone implant with a 3D-printed porous structure was prepared and implanted in a bone hole created in the tibias of rabbits. We observed bone ingrowth in the same individual specimens immediately and at 2, 4, 8, and 12 weeks post-implantation using in-vivo computed tomography (CT). Furthermore, a detailed evaluation with blood vessels of each specimen at 2, 4, and 12 weeks was performed with ex-vivo CT and histological specimen. Additional histological evaluation was performed using thin sections of an implant made with thermoplastic polyurethane having the same structure. As a result, the bone invasion began after four weeks, when the construction of fibrous tissue and the spread of new blood vessels within the voids matured. As the bone matured in the load-bearing area, new blood vessels outside the bone matrix regressed. This longitudinal evaluation study suggests that preceding fibrogenesis and vascularization may be key in developing bone ingrowth. STATEMENT OF SIGNIFICANCE: A porous structure is an essential structure for dental and orthopedic implants because it provides strong fixation through bone invasion. Although it was known that vascularization was involved in this, the details were not known. This in vivo study revealed that in order for bone ingrowth to begin, a preparatory period of approximately 4 weeks was required to establish blood flow inside and outside the implant. Furthermore, it was confirmed that by spreading the fibrous structure in advance, it has an advantageous effect on the migration of cells involved in the formation of bones and blood vessels. We pointed out that it is necessary to consider fibrogenesis and vascularization when creating future implants.

Enhancing the correlation between in vitro and in vivo experiments in dental implant osseointegration: investigating the role of Ca ions.

This study delves into the osteogenic potential of a calcium-ion modified titanium implant surface, unicCa, employing state-of-the-art proteomics techniques both in vitro (utilizing osteoblasts and macrophage cell cultures) and in vivo (in a rabbit condyle model). When human osteoblasts (Hobs) were cultured on unicCa surfaces, they displayed a marked improvement in cell adhesion and differentiation compared to their unmodified counterparts. The proteomic analysis also revealed enrichment in functions associated with cell migration, adhesion, extracellular matrix organization, and proliferation. The analysis also underscored the involvement of key signalling pathways such as PI3K-Akt and mTOR. In the presence of macrophages, unicCa initially exhibited improvement in immune-related functions and calcium channel activities at the outset (1 day), gradually tapering off over time (3 days). Following a 5-day implantation in rabbits, unicCa demonstrated distinctive protein expression profiles compared to unmodified surfaces. The proteomic analysis highlighted shifts in adhesion, immune response, and bone healing-related proteins. unicCa appeared to influence the coagulation cascade and immune regulatory proteins within the implant site. In summary, this study provides a comprehensive proteomic analysis of the unicCa surface, drawing correlations between in vitro and in vivo results. It emphasizes the considerable potential of unicCa surfaces in enhancing osteogenic behavior and immunomodulation. These findings significantly contribute to our understanding of the intricate molecular mechanisms governing the interplay between biomaterials and bone cells, thereby facilitating the development of improved implant surfaces for applications in bone tissue engineering.

Photoelectrons Sequentially Regulate Antibacterial Activity and Osseointegration of Titanium Implants.

Titanium implants are widely used ; however, implantation occasionally fails due to infections during the surgery or poor osseointegration after the surgery. To solve the problem, an intelligent functional surface on titanium implant that can sequentially eradicate bacteria biofilm at the initial period and promote osseointegration at the late period of post-surgery time is designed. Such surfaces can be excited by near infrared light (NIR), with rare earth nanoparticles to upconvert the NIR light to visible range and adsorb by Au nanoparticles, supported by titanium oxide porous film on titanium implants. Under NIR irradiation, the implant converts the energy of phonon to hot electrons and lattice vibrations, while the former flows directly to the contact substance or partially reacts with the surrounding to generate reactive oxygen species, and the latter leads to the local temperature increase. The biofilm or microbes on the implant surface can be eradicated by NIR treatment in vitro and in vivo. Additionally, the surface exhibits superior biocompatibility for cell survival, adhesion, proliferation, and osteogenic differentiation, which provides the foundation for osseointegration. In vivo implantation experiments demonstrate osseointegration is also promoted. This work thus demonstrates NIR-generated electrons can sequentially eradicate biofilms and regulate the osteogenic process, providing new solutions to fabricate efficient implant surfaces.

Effect of Novel Low-intensity Pulsed Ultrasound Stimulation on Accelerated Implant Osteointegration in Canine.

AIM: To evaluate the effect of low-intensity pulsed ultrasound (LIPU) application on dental implant accelerated osseointegration in the two-stage implant protocol. MATERIALS AND METHODS: A total of 20 implants were placed in 10 mature mongrel dogs, two implants for each dog replacing the lower 3rd premolars bilaterally. After 3 months of extraction, implants were placed. After 24 hours of implantation, the right sides received LIPU for 20 mins/day, continuously for 20 days. The left sides didn't receive LIPU (control). Standardized radiographs were taken before LIPU and after 10 and 20 days for both sides. After 20 days of LIPU application, second-stage surgery was performed and provisional crowns were placed on each implant. Implants were subjected to functional occlusal loading for 4 weeks. Standardized radiographs were taken after 2 and 4 weeks of loading and analyzed to assess the peri-implant bone density changes. All data were collected, tabulated, and statistically analyzed. RESULTS: All tissues appeared clinically normal, with the absence of inflammation and peri-implant radiolucency. The survival rate was 100%. The LIPU group showed a statistically significantly higher percentage increase in mean bone density after 10 LIPU sessions, 20 LIPU sessions, and 2 and 4 weeks of loading, than a control group. CONCLUSION: The LIPU stimulation radiographically increased the bone density around implant area and accelerated osseointegration in the two-stage implant protocol. CLINICAL SIGNIFICANCE: Low-intensity pulsed ultrasound stimulation could be beneficial in accelerating osseointegration and thus shortening the waiting period for final prosthetic delivery.

Synergistic Enhancement of Protein Recruitment and Retention via Implant Surface Microtopography and Superhydrophilicity in a Computational Fluid Dynamics Model.

The exact mechanisms by which implant surface properties govern osseointegration are incompletely understood. To gain insights into this process, we examined alterations in protein and blood recruitment around screw implants with different surface topographies and wettability using a computational fluid dynamics (CFD) model. Compared with a smooth surface, a microrough implant surface reduced protein infiltration from the outer zone to the implant thread and interface zones by over two-fold. However, the microrough implant surface slowed blood flow in the interface zone by four-fold. As a result, compared with the smooth surface, the microrough surface doubled the protein recruitment/retention index, defined as the mass of proteins present in the area per unit time. Converting implant surfaces from hydrophobic to superhydrophilic increased the mass of protein infiltration 2-3 times and slowed down blood flow by up to two-fold in the implant vicinity for both smooth and microrough surfaces. The protein recruitment/retention index was highest at the implant interface when the implant surface was superhydrophilic and microrough. Thus, this study demonstrates distinct control of the mass and speed of protein and blood flow through implant surface topography, wettability, and their combination, significantly altering the efficiency of protein recruitment. Although microrough surfaces showed both positive and negative impacts on protein recruitment over smooth surfaces, superhydrophilicity was consistently positive regardless of surface topography.

Antibiotic prophylaxis dysregulates dental implant placement surgery-induced osteoimmune wound healing and attenuates the alveolar bone-implant interface in mice.

AIM: Antimicrobial-induced shifts in commensal oral microbiota can dysregulate helper T-cell oral immunity to affect osteoclast-osteoblast actions in alveolar bone. Antibiotic prophylaxis is commonly performed with dental implant placement surgery to prevent post-surgical complications. However, antibiotic prophylaxis effects on osteoimmune processes supporting dental implant osseointegration are unknown. The aim of the study was to discern the impact of antibiotic prophylaxis on dental implant placement surgery-induced osteoimmune wound healing and osseointegration. MATERIALS AND METHODS: We performed SHAM or dental implant placement surgery in mice. Groups were administered prophylactic antibiotics (amoxicillin or clindamycin) or vehicle. Gingival bacteriome was assessed via 16S sequencing. Helper T-cell oral immunity was evaluated by flow cytometry. Osteoclasts and osteoblasts were assessed via histomorphometry. Implant osseointegration was evaluated by micro-computed tomography. RESULTS: Dental implant placement surgery up-regulated TH 1, TH 2 and TREG cells in cervical lymph nodes (CLNs), which infers helper T-cell oral immunity contributes to dental implant placement osseous wound healing. Prophylactic antibiotics with dental implant placement surgery caused a bacterial dysbiosis, suppressed TH 1, TH 2 and TREG cells in CLNs, reduced osteoclasts and osteoblasts lining peri-implant alveolar bone, and attenuated the alveolar bone-implant interface. CONCLUSIONS: Antibiotic prophylaxis dysregulates dental implant placement surgery-induced osteoimmune wound healing and attenuates the alveolar bone-implant interface in mice.

Fabrication of a micro/nanocomposite structure on the surface of high oxygen concentration titanium to promote bone formation.

This study investigated the properties of the micro/nano composite structure on the surface of high oxygen concentration titanium (HOC-Ti) after anodic oxidation modification (HOC-NT) and evaluated its biocompatibility as a dental implant material in vitro and in vivo. HOC-Ti was produced by titanium powders and rutile powders using the powder metallurgy method. Its surface was modified by anodic oxidation. After detecting the electrochemical characteristics, the surface properties of HOC-NT were investigated. MC3T3 and MLO-Y4 cells were employed to evaluate the biocompatibility of HOC-NT and cocultured to study the effects of the changes in osteocytes induced by HOC-NT on osteoblasts. While, its possible mechanism was investigated. In addition, osseointegration around the HOC-NT implant was investigated through in vivo experiments. The results showed that a unique micronano composite structure on the HOC-Ti surface with excellent hydrophilicity and suitable surface roughness was created after anodic oxidation promoted by its electrochemical characteristics. The YAP protein may play an important role in regulating bone remodeling by ß-catenin and Rankl/OPG Signaling Pathways. An in vivo study also revealed an accelerated formation rate of new bone and more stable osseointegration around the HOC-NT implant. In view of all experimental results, it could be concluded that the unique morphology of HOC-NT has enhanced physicochemical and biological properties. The promotion of bone formation around implants indicated the feasibility of HOC-NT for applications in oral implants.

Management of Posterior Mandibular Bone Cavitation for Dental Implant Placement: A Case Series of 5-24 Years of Follow-Up.

Focal osteo-cavitation in the posterior mandible is a condition that clinicians do not know well. Inadvertent implant placement in such areas may result in nerve damage due to abrupt drill penetration and implant displacement in the medullary space. In the present case series, focal osteo-cavitation was managed with the following procedures: (1) undersized drilling, (2) gentle trabecular curettage, (3) bone substitute material grafting in the cavity, and (4) long healing period for osseointegration. In all cases, a sudden loss of drilling pressure immediately after passing through the thin cortical layer revealed focal osteo-cavitation. Following undersized drilling and gentle trabecular curettage, the bone substitute material was packed into the cavity with care not to press the inferior alveolar canal. Implant placement was subsequently performed. Despite a lack of primary implant stability in 3 of 4 cases, all implants were successfully osseointegrated after 6-9 months. Over 5-24 years, all implants functioned well.

Agglomeration effect on biomechanical performance of CNT-reinforced dental implant using micromechanics-based approach.

Dental implants have long played an important role in restoring lost teeth, but there are still concerns about their durability and long-term success. Commercial dental implants have traditionally been made of metallic and ceramic materials like titanium and zirconia; however, each kind of material has restrictions regarding osseointegration and mechanical characteristics that differ between native bone and the implant material, limiting the implant's longevity and reliability. To address these concerns, this research explores the use of carbon nanotubes (CNTs) in restorative dentistry, their excellent properties make them an ideal candidate for promoting bone growth around implanted device and ensuring long-lasting success. The objective of this study was to understand how CNT properties when incorporated into the titanium matrix may be able to better adapt to the oral environment taking into consideration the CNT agglomeration effects when designing reinforced nanocomposite materials for dental implant. A mathematical formulation of the micromechanics model was developed and improved to extend its application for the case of CNT-based composite materials for dental implants. A three dimensional (3D) model of bone structure around the osseointegrated dental implant was established considering different compositions of implant material. Finite Element Analysis (FEA) were conducted to assess the aggregation effect of implant incorporating CNTs into the titanium matrix, considering CNTs with both spherical inclusions (CNT clusters), and randomly dispersive ones (CNTs) in the titanium matrix, on osseointegration and bone remodeling around the dental implant and supporting bone system over a period of 48 months. Firstly, the effects of CNT-Ti implantation on time-dependent performance are evaluated in a computational remodeling framework. Then, Von Mises equivalent stresses are investigated to evaluate the stress distributions and micromotions in jaw bones of loaded implant with different composition of prosthetic material. Three agglomeration patterns are considered, particularly without agglomeration (ζ = ξ), partial and complete agglomeration (ζ < ξ, ξ = 1). Further, the influence of CNTs volume fraction variation is taken into account to predict the mechanical response of the bony system after CNT-reinforced dental implantation. It can be inferred that the agglomeration of CNTs reduces the elastic stiffness of the matrix. This is due to the fact that when CNTs are agglomerated, the inter-tube contacts are reduced and the effective stiffness of the matrix is decreased.

Construction of a Ni(OH)2@CaTiO3 heterostructure on a Ti implant for enhanced osseointegration through NIR photoactivated bacterial inactivation and microenvironment optimization.

Desirable antibacterial and osseointegration abilities are essentially important for long-term survival of a Ti-orthopedic implant. Herein, a near-infrared light (NIR) excited antibacterial platform with excellent osseointegration composed of perovskite calcium titanate/nickel hydroxide on a Ti implant (Ni(OH)2@CaTiO3/Ti) was designed and successfully fabricated. The construction of the heterostructure efficiently separated the photogenerated electron-hole pairs to produce sufficient reactive oxygen species (ROS), which enabled the photoactivated bacterial inactivation (PBI) of Ti implants. The results showed that the surface-modified Ti implant displayed remarkable antibacterial ability with bacterial inhibition rates of 95.5% for E. coli and 93.8% for S. aureus under NIR excitation. Also, the intervention of Ni(OH)2 could create a slightly alkaline surface on the Ti implant, which synchronized with Ca-rich CaTiO3 to regulate the osteogenic microenvironment in favor of the adhesion, proliferation and differentiation of MC3T3-E1 cells as well as the up-regulation of osteogenesis-related gene expressions. The in vivo implantation experiments further confirmed that the heterostructured coating prominently accelerated the formation of new bone and promoted the osseointegration of Ti implants. Our work may provide a novel concept for improving the antibacterial and osseointegration abilities of Ti implants in orthopedic and dental applications.

Impact of a modified implant macrogeometry on biomechanical parameters and bone-related markers in rats.

This study investigated the impact of a modified implant macrogeometry on peri-implant healing and its effect on bone-related molecules in rats. Eighteen rats received one implant in each tibia: the control group received implants with conventional macrogeometry and the test group received implants with modified macrogeometry. After 30 days, the implants were removed for biomechanical analysis and the bone tissue around them was collected for quantifying gene expression of OPN, Runx2, ß-catenin, BMP-2, Dkk1, and RANKL/OPG. Calcein and tetracycline fluorescent markers were used for analyzing newly formed bone at undecalcified sections of the tibial implants. These fluorescent markers showed continuous bone formation at cortical bone width and sparse new bone formed along the medullary implant surface in both groups. However, higher counter-torque values and upregulation of OPN expression were achieved by test implants when compared to controls. The modified macrogeometry of implants optimized peri-implant healing, favoring the modulation of OPN expression in the osseous tissue around the implants.

Accuracy of osseointegrated screw-bone construct stiffness and peri-implant loading predicted by homogenized FE models relative to micro-FE models.

Computational predictions of stiffness and peri-implant loading of screw-bone constructs are highly relevant to investigate and improve bone fracture fixations. Homogenized finite element (hFE) models have been used for this purpose in the past, but their accuracy has been questioned given the numerous simplifications, such as neglecting screw threads and modelling the trabecular bone structure as a continuum. This study aimed to investigate the accuracy of hFE models of an osseointegrated screw-bone construct when compared to micro-FE models considering the simplified screw geometry and different trabecular bone material models. Micro-FE and hFE models were created from 15 cylindrical bone samples with a virtually inserted, osseointegrated screw (fully bonded interface). Micro-FE models were created including the screw with threads (=reference models) and without threads to quantify the error due to screw geometry simplification. In the hFE models, the screws were modelled without threads and four different trabecular bone material models were used, including orthotropic and isotropic material derived from homogenization with kinematic uniform boundary conditions (KUBC), as well as from periodicity-compatible mixed uniform boundary conditions (PMUBC). Three load cases were simulated (pullout, shear in two directions) and errors in the construct stiffness and the volume average strain energy density (SED) in the peri-implant region were evaluated relative to the micro-FE model with a threaded screw. The pooled error caused by only omitting screw threads was low (max: 8.0%) compared to the pooled error additionally including homogenized trabecular bone material (max: 92.2%). Stiffness was predicted most accurately using PMUBC-derived orthotropic material (error: -0.7 ± 8.0%) and least accurately using KUBC-derived isotropic material (error: +23.1 ± 24.4%). Peri-implant SED averages were generally well correlated (R2 ≥ 0.76), but slightly over- or underestimated by the hFE models and SED distributions were qualitatively different between hFE and micro-FE models. This study suggests that osseointegrated screw-bone construct stiffness can be predicted accurately using hFE models when compared to micro-FE models and that volume average peri-implant SEDs are well correlated. However, the hFE models are highly sensitive to the choice of trabecular bone material properties. PMUBC-derived isotropic material properties represented the best trade-off between model accuracy and complexity in this study.

[Physiological reactions in the interface between cementless implants and bone]. / Physiologische Reaktionen im Interface zementfreier Implantate.

BACKGROUND: Surgical treatment of patients with osteoarthritis of the hip and persisting symptoms under conservative therapy has become increasingly important against the background of an aging population. OBJECTIVES: What are the physiological reactions in the interface between cementless implants and bone? METHODS: The literature is reviewed, expert opinions and animal models are analyzed and discussed. RESULTS: Surface coating of implants with hydroxyapatite or titanium can have positive effects on osteointegration. Additional local application of mediators might be beneficial for osteointegration in the future. CONCLUSION: Early peri-implant bone healing directly after implantation and late remodeling of the bone-implant interface are essential for secondary implant stability.

An Experimental Anodized and Low-Pressure Oxygen Plasma-Treated Titanium Dental Implant Surface-Preliminary Report.

Chemical composition and physical parameters of the implant surface, such as roughness, regulate the cellular response leading to implant bone osseointegration. Possible implant surface modifications include anodization or the plasma electrolytic oxidation (PEO) treatment process that produces a thick and dense oxide coating superior to normal anodic oxidation. Experimental modifications with Plasma Electrolytic Oxidation (PEO) titanium and titanium alloy Ti6Al4V plates and PEO additionally treated with low-pressure oxygen plasma (PEO-S) were used in this study to evaluate their physical and chemical properties. Cytotoxicity of experimental titanium samples as well as cell adhesion to their surface were assessed using normal human dermal fibroblasts (NHDF) or L929 cell line. Moreover, the surface roughness, fractal dimension analysis, and texture analysis were calculated. Samples after surface treatment have substantially improved properties compared to the reference SLA (sandblasted and acid-etched) surface. The surface roughness (Sa) was 0.59-2.38 µm, and none of the tested surfaces had cytotoxic effect on NHDF and L929 cell lines. A greater cell growth of NHDF was observed on the tested PEO and PEO-S samples compared to reference SLA sample titanium.

Niveles bajos de vitamina D y su efecto en la oseointegración: revisión sistemática / Low levels of vitamin D and effect on osseointegration: a systematic review

Introducción: la vitamina D es una hormona que se sintetiza por células de la piel mediante la luz ultravioleta (UV) y se obtiene a través de la dieta. La relación que se establece entre la deficiencia de vitamina D y el fracaso en injertos óseos o implantes se basa en las alteraciones inmunológicas e inflamatorias debido al vínculo que existe con la inmunidad innata y adaptativa. Objetivo: identificar los factores que se presentan en el periodonto cuando existen niveles bajos de vitamina D y se realizan tratamientos periodontales como injertos óseos e implantes. Material y métodos: se realizó la búsqueda primaria de artículos en bases de datos PubMed y Google Académico (en español e inglés), de acuerdo con las palabras claves: deficiencia, vitamina D, implantología y oseointegración. Resultados: la vitamina D afecta y predispone al rechazo de injertos, ausencia de oseointegración en implantes debido a la inmunomodulación. Conclusión: el éxito del tratamiento se vuelve predecible cuando se encuentran niveles óptimos de vitamina D en conjunto con técnicas de abordaje quirúrgico correctas que permitan generar una integración ideal de los tejidos periodontales (AU)

Introduction: vitamin D is a hormone that is synthesized by skin cells using UV light and consumed through the diet. The relationship established between vitamin D deficiency and the failure of bone grafts or implants is based on immunological and inflammatory alterations due to the intimate link with innate and adaptive immunity. Objective: to identify the factors that occur in the periodontium when there are low levels of vitamin D and periodontal treatments such as bone grafts and implants are performed. Material and methods: a search for articles was carried out in PubMed and Google Scholar (Spanish and English). Results: vitamin D affects and predisposes to graft rejection, absence of osseointegration in implants due to immunomodulation. Conclusion: the success of the treatment becomes predictable when optimal levels of vitamin D are found together with the correct surgical approach techniques that allow the generation of an ideal integration of the periodontal tissues.(AU)

The role of mitochondria in the peri-implant microenvironment.

NEW FINDINGS: What is the topic of this review? In this review, we consider the key role of mitochondria in the peri-implant milieu, including the regulation of mitochondrial reactive oxygen species and mitochondrial metabolism in angiogenesis, the polarization of macrophage immune responses, and bone formation and bone resorption during osseointegration. What advances does it highlight? Mitochondria contribute to the behaviours of peri-implant cell lines based on metabolic and reactive oxygen species signalling modulations, which will contribute to the research field and the development of new treatment strategies for improving implant success. ABSTRACT: Osseointegration is a dynamic biological process in the local microenvironment adjacent to a bone implant, which is crucial for implant performance and success of the implant surgery. Recently, the role of mitochondria in the peri-implant microenvironment during osseointegration has gained much attention. Mitochondrial regulation has been verified to be essential for cellular events in osseointegration and as a therapeutic target for peri-implant diseases in the peri-implant microenvironment. In this review, we summarize our current knowledge of the key role of mitochondria in the peri-implant milieu, including the regulation of mitochondrial reactive oxygen species and mitochondrial metabolism in angiogenesis, the polarization of macrophage immune responses, and bone formation and resorption during osseointegration, which will contribute to the research field and the development of new treatment strategies to improve implant success. In addition, we indicate limitations in our current understanding of the regulation of mitochondria in osseointegration and suggest topics for further study.

The Influence of Storage in Saline or Irradiation by Ultraviolet on Surface Hydrophilicity of Implant and Osseointegration: An Experimental Study in Rabbits.

Storage in aqueous solution or ultraviolet (UV) irradiation can retain or regain the hydrophilicity of titanium implant surface. In this study, 3 types of commercial titanium implants were used: ZBL (ZDI Bone Level), CEL (C-tech Esthetic Line), and modSLA (Straumann SLActive). ZBL and CEL implants were treated with UV irradiation for 4 hours. Surface characterization of the 4 groups (ZBL, ZBL-UV, CEL-UV, and modSLA) was evaluated by scanning electron microscopy and contact angle measurements. The in vivo bone response was evaluated by removal torque (RTQ) tests and histomorphometric analysis at 3, 6, and 12 weeks postimplantation. A total of 144 implants and 36 rabbits were used for experiments according to a previously established randomization sequence. The ZBL-UV, CEL-UV, and modSLA groups were hydrophilic, and nanostructures were observed on the modSLA implant surface. ModSLA achieved better RTQ value than ZBL at 12 weeks (P < .05). For histomorphometric analysis, ZBL-UV and CEL-UV implants showed higher bone area values in the cancellous bone zone at 6 weeks than did modSLA and ZBL implants (P < .05). In the cortical bone zone, all groups showed comparable bone-to-implant contact at all healing time points (P > .05). Both storage in saline and UV irradiation could retain or provoke hydrophilic surfaces and improve osseointegration. Compared with storage in saline, UV irradiation displayed slight advantages in promoting new bone formation in cancellous bone zone at an early stage.